Wireless supported devices.
| Package Speed | Suggested Supported Routers | Examples |
| 40 Mbps | 802.11n-N300 Router | D Link DIR 615 |
| 40 Mbps to 100 Mbps | 802.11ac -AC750 Router | D Link DIR 816, TP-Link Archer C20 |
| 100 Mbps to 250 Mbps | 802.11ac- AC1200 Router | D Link 825, TP-Link C1200 |
5G and IPv6 Supported devices.
| Devcices | 2G | 5G Ready | IPv6 Ready | Speed |
| TP Link Archaer C1200 V2 | Yes | Yes | Yes | 1G |
| D Link Dir-825 | Yes | Yes | Yes | 1G |
| D Link Dir-615 | Yes | No | Yes | 100 Mbps |
| TP Link TL-WE840N | Yes | No | Yes | 100 Mbps |
| TP-Link-Archar A5 | Yes | Yes | Yes | 100 Mbps |
| TP Link-AC1350-ArcharC60 | Yes | Yes | Yes | 100 Mbps |
| D link DIR-878 | Yes | Yes | Yes | 100 Mbps |
| TP Link Archaer C50 AC1200 | Yes | Yes | Yes | 100 Mbps |
| TP Link Archaer C55 AC1200 | Yes | Yes | Yes | 100 Mbps |
Wireless Installation Considerations
The D-Link wireless router lets you access your network using a wireless connection from virtually anywhere within the operating range of your wireless network. However, keep in mind that the number, thickness, and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your usage area. You can optimize wireless range and signal strength by following these basic guidelines:
Keep the number of walls and ceilings between the router and other network devices to a minimum - each wall or ceiling can reduce your network’s range by up to 30 meters (98 feet). Position your devices so that the number of walls or ceilings in the signal’s path is minimized.
Be aware of the direct line between network devices. A wall that is 0.5 meters thick (1.5 feet) appears to be almost 1 meter (3 feet) thick at a 45-degree angle. At a 2-degree angle it appears over 14 meters (42 feet) thick! Position devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception.
Building materials make a difference. A solid metal door or aluminum studs may have a detrimental effect on range. Try to position access points, wireless routers, and computers so that the signal passes through drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water (fish tanks), mirrors, file cabinets, brick, and concrete can degrade your wireless signal.
Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that generate RF noise.
If you are using 2.4 GHz cordless phones or X-10 (wireless products such as ceiling fans, lights, and home security systems), your wireless connection may degrade dramatically or drop completely. Make sure your 2.4 GHz phone base is as far away from your wireless devices as possible. The base transmits a signal even if the phone is not in use.
Note: Please do not keep wireless router's near to Electronic devices.